Detail of the update
The firmware update Ver.2.00 incorporates the following issues.
Image size with <S 16:9>, is added in the menu option at “F-MODE” selection. Then captured image with <16:9> can be displayed with full screen by 16:9 size monitor without side black bars.
For new MENU screen for “IMAGE SIZE”, please download the following
PDF file.
Precaution1. If firmware updating fails, the camera may no longer operate correctly in some cases.
Carefully read the notes provided here.
2. Always use the fully-charged NP-95 battery or the AC adapter when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
3. Firmware updating requires approximately 20 seconds.
4. Once the firmware has been updated, the previous version cannot be restored.
Preparation
1.Prepare the target digital camera.
FinePix REAL 3D W1(Version 1.00)
2.Prepare the media.
The firmware updating procedure requires a formatted media. Refer to the FinePix REAL 3D W1 Owner's Manual (p.85) for information on using “FORMAT” in the SET-UP menu to format a media.
Note that formatting procedure will delete all data on the media, including protected files. Always copy any important files that you do not want to lose to your PC beforehand.
3.Prepare the power supply.
Use the fully-chared NP-95 battery or the AC adapter (AC-5VC).
4.Prepare the USB cable.
Have the USB cable bundled with your camera ready.
Download
Firmware Update
Part of the message is hidden for the guests. Please log in or register to see it.
The transfer program.
Part of the message is hidden for the guests. Please log in or register to see it.
credit: FujiFilm.com